Manual to obtaining a Bicycle Storage Answer

Points to look out for when acquiring a Cycle Storage Solution.

What is the objective of the Cycle Shelter?

Are you seeking to keep Grownup or Junior Bikes, Scooters, Push Chairs. Or a combination of all three?

If you are working to a selected budget or are constrained on where the shelter can be located, this is exactly where we would advise a free of charge on-site survey.

How safe do you want the Cycle Shed to be?

Is an Anti-Graffiti coating essential and does the shelter need to be reinforced with metal for added strength or transparent polycarbonate perhaps a suitable selection.

All of our covers can be fitted with many unique choices of stands and believe about what variety of finish you want the stands to be in.

What design and style of shelter are you searching for ?

Has the shelter got to be inside of a funds. Please be aware: Some manufactures use thinner and smaller sized size box section and miss some of the processes which we carry out as standard. But we do make certain our clients are totally conscious of the products they are getting.

What form of ground is the shelter to be put in on?

Does your cycle shelter necessitate a concrete base, or the legs to be set up in to the ground? If the ground is uneven and the cycle shelter is to be bolted down to the current ground, does the shelter require adjustable feet?



The Production Method of Bike Shelter.

You must search for a manufacturer or supplier of a bike shed that complies with British Basic safety Criteria as a rule.

The products necessary for that distinct dimension cycle shelter are then collated and ordered.

Metal box section is reduced, shaped and drilled, then welded by 1 of our qualified coded welders. The Bicycle Shed is then moved to our fettling location, in which all the sharp edges are made flat.

A pre-assembly takes area inside the factory prior to it is moved to our finishing shop. This provides us the chance to check the high quality, assembly and size of the requiredshelter.

The Bike Shelter is then sent to our finishing shop in which the steel is degreased completely, by hand or dipped in our degreasing plant. A zinc coat is applied to the metal frame to avoid the metal from rusting. A topcoat of powder paint to the clients specified colour is utilized and baked off in our ovens at 295 Degrees Celsius.

The cycle shelter is inspected, then loaded on to our van prepared for delivery to our consumer.